.pdf version
 
    NSI-300V-30x15
30' x 15' (9.1 m x 4.6 m) Vertical Planar Near-field Measurement System

DESCRIPTION

The 300V-30x15 is an ideal system for measuring medium and high gain antennas (>15 dBi) with medium sized apertures making it suitable for testing medium arrays or reflector antennas. The 300V-30x15 is based on a inverted "T" design and is constructed of steel. For high stability a welded cross-braced dual-rail base is used. This robust design is easy to maintain and align, and highly accurate. The high capacity probe carriage accommodates probes as low as WR1500 including optional roll and Z stages.
CAPABILITIES

The system interfaces with a wide variety of RF equipment and is capable of measuring amplitude and phase patterns from L-band to mmWave bands. The system includes NSI Antenna Measurement Software.

The system software runs on a Pentium based measurement workstation and provides automatic setup of scans based on measurement parameters and desired output. Measured data can be processed for far-field or holographic patterns yielding complete characterization of the antenna's performance. A single data set provides information on antenna gain, side lobes structure, beam pointing and cross polarization.

The 300V-30x15 can be supplied with a variety of options and can be upgraded to allow for cylindrical or spherical measurements to expand system utility.
FEATURES
  • High accuracy planarity <0.004" (0.10 mm) RMS
  • 30' x 15' (9.1 m x 4.6 m) scan area
  • Precision rack and pinion drive
  • L-band to mmWave measurements.
  • Inverted "T" frame design for high accuracy
  • Far-field, Near-field and Holographic patterns
  • Cylindrical and Spherical options available

SPECIFICATIONS
Construction Inverted "T" Frame (steel)
Drive System Precision Stepper Motor;
Rack and Pinion
Scan Area 30' x15' (9.1 m x 4.6 m)
Planarity <0.004" (0.10 mm) RMS
Corrected Planarity (Requires optional Structure Correction Software and Probe Translation Stage) <0.002" (0.05 mm) RMS
Resolution (x, y). 0.001" (0.025 mm)
Position Repeatability 0.002" (0.05 mm) RMS
Scan Speed (X - Y) X - 10 in/s (0.25 m/s)
Y - 15 in/s (0.38 m/s)
Probe Carriage Capacity 125 lbs. (56.8 kg) maximum
recommended, WR1500
System Controller NSI controller with parallel I/O, and serial interface
Measurement Workstation Measurement workstation computer with large LCD monitor.
Stepper Motor Power Amplifier EIA 19" rack mount. (7"H x 14"D)
Motor Cables Quick-connect; 40' (12 m)
Scanner Absorber X-Y Absorber Kit (12” pyramidal cone)
Probe WR90 Open-ended Waveguide Probe SMA (f) transition & Pyramidal absorber (3")
Probe Mount Angle Bracket - allows mounting probe in "V" or "H" orientation
RF Cables 20 GHz RF Cables
Supported RF Devices NSI Panther Receiver Subsystem or selection of Agilent, Rohde & Schwarz and Anritsu VNA's (contact NSI for a complete list)
Power 100-240 VAC switchable,
47-63 Hz, 500 watts

 

 

 

DIMENSIONS

  • Width - 424 " (10.8 m)
  • Depth - 85 " (2.2 m)
  • Height - 233" (5.9 m)
  • System Weight - 6 000 lbs (2 722 kg) approx.
LINKS
  • No additional links are currently available.
    •
ORDERING INFORMATION

NSI-300V-30x15 - 30' x 15' (9.1 m x 4.6 m) scanner system including X-Y stepper motor driven scanner with dual rail steel base, motor cable set, controller, PC based measurement workstation, motor drive electronics, NSI antenna measurement software, installation tool kit, system documentation and operation manual.

OPTIONS

Opt 100 - 220VAC 50 Hz Operation
Opt 101 - European Version
NSI-SC-5621E - Probe Translation Stage, Extra Heavy Duty, 10 inch (250 mm) Travel
NSI-SC-5631 - Probe Roll Stage (High Capacity) with 26.5 GHz rotary joint
NSI-SW-5301 - Upgrade NSI Standard Edition Software to Professional
NSI-SW-5105 - Motion Tracking Interferometer (MTI) Software

For additional options and information see Scanner Options and Accessories

Nearfield Systems, Incorporated
19730 Magellan Drive, Torrance, CA 90502, USA, Tel: 310.525.7000, Fax: 310.525.7100
Email: sales@nearfield.com. Visit our website: www.nearfield.com